Dyeing Auxiliaries-Polyseter
Dyeing Auxiliaries-Polyseter
TRANSLEVEL JD-201F CONC. Nonionic pH:3.0-5.0 Concentrated product.
Used for oil removing and leveling of knitted polyester. Has excellent dispersing, emulsifying, anti-back staining and leveling properties.
Dosage: 0.2-1.0 g/L
TRANSLEVEL JD-205 Nonionic pH: 4.5-6.5
Suitable for micro polyester fabric, package yarn, reeled yarn and loose fibers in dyeing or cleaning dyeing vessel after dyeing. Prevent oligomer occurring and dyes agglomerating; decrease staining on the dyeing vessel. Suitable for package yarn dyeing, decrease white ground fibers and color difference. Impart yarn with excellent weaving and winding properties.
Dosage: Dyeing in one bath 0.5-2.0 g/L
TRANSLEVEL JD-211B Anionic/Nonionic pH: 6.0-8.0
Suitable for dyeing of polyester package yarn under high temperature and high pressure. Excellent high temperature dispersing and leveling properties. Excellent penetration property.
Dosage: 0.5-2.0 g/L
TRANSLEVEL JD-212A Anionic/Nonionic pH: 5.0-7.0
Suitable for dyeing of micro polyester fabric under high temperature and high pressure. Strong migrating power; Can be used to repair dyeing defects when increasing the dosage. Excellent retarding property to control dyeing percentage at early dyeing stage; small achromaticity; good reproducibility.
Dosage: 0.5-2.0 g/L
TRANSLEVEL JD-212A CONC. Anionic/Nonionic pH: 4.0-6.0 Concentrated product.
Suitable for dyeing of micro polyester fabric under high temperature and high pressure. It is the concentrated product of TF-212A. Diluted temperature: 70-80℃; Dilution ratio: 1:4
Dosage(original): 0.15-0.5 g/L
TRANSLEVEL JD-212F Anionic/Nonionic pH: 5.0-7.0
Suitable for dyeing of polyester, especially of micro polyester fabric. Excellent leveling agent. Good compatibility and less influence on the following functional finishing. Less washing times after dyeing to save water and energy.
Dosage: 0.3-1.0 g/L.
TRANSLEVEL JD-212K Anionic/Nonionic pH: 4.0-6.0
Suitable for dyeing of polyester, especially of micro polyester fabric under high temperature and high pressure. Excellent dispersion at high temperature to prevent dyes agglomeration. Little achromaticity. Good reproducibility.
Dosage: 0.3-1.0 g/L
TRANSLEVEL JD-212K CONC. Anionic/Nonionic pH: 5.0-7.0 High concentrated product.
Suitable for dyeing of polyester, especially of micro polyester fabric under high temperature and high pressure. It is concentrated product of TF-212K. Diluted temperature: room temperature. Dilution ratio: 1:6
Dosage(original): 0.15-1.0 g/L
TRANSLEVEL JD-212W Anionic/Nonionic pH: 5.0-7.0
Suitable for high temperature and high pressure dyeing of normal polyester and super-micro polyester. It has excellent high temperature dispersing property, prevent the dyestuff from agglomerating. Strong in migrating.
Dosage(original): 0.3-1.5 g/L
TRANSLEVEL JD-213B Nonionic pH: 6.0-8.0
Suitable for dyeing of micro polyester fabric under high temperature and high pressure. Excellent retarding property to control dyeing percentage at early dyeing stage. Excellent migration to decrease color difference.
Dosage: 0.5-2.0 g/L
TRANSLEVEL JD-213HA Nonionic pH: 4.0-6.0
Suitable for dyeing of micro polyester fabric under high temperature and high pressure. Excellent migration on sensitive colors such as disperse color blue and turquoise blue. Excellent emulsifying and dispersing properties for oil, oligomer and other impurities. Excellent high temperature dispersion and levelness.
Dosage: 0.5-2.0 g/L
TRANSLEVEL JD-215 Nonionic pH: 6.0-8.0
Suitable for dyeing of micro polyester fabric under high temperature and high pressure. Excellent migration, dispersion and retarding properties. Improve disperse dyes compatibility. Reduce color differences; Good reproducibility.
Dosage: 0.5-1.5 g/L
TRANSLEVEL JD-215A Nonionic pH: 6.0-8.0
Suitable for dyeing of micro polyester fabric under high temperature and high pressure. Excellent migration, dispersion and retarding properties. Improve disperse dyes’ compatibility. Reduce color differences; Good reproducibility.
Dosage: 0.5-2.0 g/L
TRANSLEVEL JD-215 CONC. Nonionic pH: 6.0-8.0
Suitable for dyeing of micro polyester fabric under high temperature and high pressure. It is concentrated product of TF-215. Dilution temperature: 40℃ ; Dilution ratio: 1:3
Dosage(original): 0.3-0.8 g/L
TRANSLEVEL JD-215B CONC. Nonionic pH: 5.0-7.0
Suitable for dyeing of micro polyester fabric under high temperature and high pressure. Dilution temperature: 40℃; Dilution ratio:1:3
Dosage(original): 0.3-0.8 g/L
TRANSLEVEL JD-215K CONC. Anionic/Nonionic pH: 3.0-5.0
Suitable for dyeing of polyester, especially for micro polyester fabric and its blends under high temperature and high pressure. Excellent high temperature dispersing property. Strong in migrating, little decoloration and good reproducibility. Low foaming. Dilution ratio: at least 1:4
Dosage(original): 0.15-1.0 g/L
CARRIER JD-258A pH: 2.5-4.5
Used for low temperature dyeing of polyester and its blends. The expanding ability of polyester fiber is very strong, which can promote dyestuff to enter into the fiber. Excellent migration, leveling ability and coverage. Low foam, light smell, easy to wash and biodegradable.
Dosage: 1.0-3.0(o.w.f)
CARRIER JD-258WH Anionic/Nonionic pH: 3.0-6.0
Suitable for the low temperature dyeing of polyester or its blends, especially for the polyester/wool blends. Can balance the dyeing on two fibers of disperse dyestuff and (weak) acidic dyestuff. Strong swelling property to polyester fiber which is beneficial for the take-up of dyestuff. Excellent migration and leveling ability.
Dosage: 0.2-3.0(o.w.f)
TRANSLEVEL JD-202 Anionic/Nonionic pH: 3.5-5.5
Suitable for polyester and its blends to get even dyeing or repair dyeing defects. Good dispersing and migrating properties; Little achromaticity.
Dosage: As leveling agent 0.5-1.0 g/L; As repairing agent 1-4 g/L
TRANSLEVEL JD-216 pH: 2.5-4.5
Suitable for polyester and its blends to get even dyeing or repair dyeing defects. Perfect migration and diffusibility, little color change.
Dosage: As leveling agent 0.2-0.5 g/L; As repairing agent 1.0-2.0 g/L
TRANSLEVEL JD-216A pH: 4.5-7.0
Suitable for polyester and its blends to get even dyeing or repair dyeing defects. Perfect migration and diffusibility, little color change. No staining.
Dosage: As leveling agent 0.2-0.5 g/L; As repairing agent 1.0-2.0 g/L
TRANSLEVEL JD-216B pH: 3.0-5.0
Suitable for polyester and its blends to get even dyeing or repair dyeing defects. Perfect migration, little color change after repairing.
Dosage: As leveling agent 0.2-0.8 g/L; As repairing agent 1.0-3.0 g/L
TRANSLEVEL JD-216H pH: 2.5-4.5
Suitable for dyeing of polyester or repairing of dyeing defects. Perfect migration and excellent de-oiling effect. Little color change after repairing.
Dosage: As leveling agent 0.2-0.5 g/L; As repairing agent 1.0-2.0 g/L
TRANSLEVEL JD-216HA pH: 2.5-4.5
Suitable for dyeing of polyester or repairing of dyeing defects. Perfect migration and excellent de-oiling effect. Little color change after repairing. Good de-oiling performance, can repair the color defects and streaks caused by oil staining effectively.
Dosage: As leveling agent 0.2-0.5 g/L; As repairing agent 1.0-3.0 g/L
TRANSLEVEL JD-216K pH: 5.0-7.0
Suitable for leveling and repairing of polyester and its blends. Perfect migration, little change of color shade. No staining.
Dosage: As leveling agent 0.2-0.5 g/L; As repairing agent 1.0-2.0 g/L
TRANSLEVEL JD-216L pH: 2.5-4.5
Suitable for polyester and its blends to get even dyeing or repair dyeing defects. Perfect migration and diffusibility, little color change after repairing. Low smelling. Easy to wash off.
Dosage: As leveling agent 0.2-0.5 g/L; As repairing agent 1.0-2.0 g/L
TRANSOP JD-110B Anionic pH: 8.0-10.5
Suitable for acid reduction clearing of disperse dyes after dyeing. No need to drain residues, neutralize and wash off. Better anti back staining performance than sodium hydrosulfite on spandex. No impact on moisture controlling property, little color change. No impact on fluorescent strength of OBA.
Dosage: 1-3%(o.w.f) Temperature 85℃; Running time 15-30 min
TRANSOP JD-110BA Anionic pH: 8.0-10.5
Suitable for acid reduction clearing of disperse dyes after dyeing. No need to drain residues, neutralize and wash off. Better anti back staining performance than sodium hydrosulfite on spandex. No impact on moisture controlling property, little color change. No impact on fluorescent strength of OBA.
Dosage: 1-3%(o.w.f) Temperature 85℃; Running time 15-30 min
TRANSOP JD-288B pH: 9.0-11.0
Suitable for acid reduction cleaning of disperse dyes after dyeing. No need to drain residues, neutralize or wash off. Better anti back staining performance than sodium hydrosulfite on spandex. No impact on moisture controlling property, little color change. No impact on fluorescent strength of OBA. High stability and low odor.
Dosage: 1-3%(o.w.f), Temperature 85℃; Running time 15-30 min
TRANSOP JD-288E pH: 6.5-8.5
Used for soaping after dyeing of T / C fabric without reduction cleaning process, realizing one-step cleaning after dyeing with disperse / reactive dyes, saving water, time and energy.
Dosage: 2-3g/L, Temperature 85-98℃; Running time 20-40 min
TRANSOP JD-288F pH: 6.0-8.0
Used for reductive cleaning of polyester / ammonia and polyester fabrics to improve washing fastness. Also used for the reductive cleaning of disperse dyestuff after dyeing, and it is in the same bath with sodium hydrosulfite to reductive clean. Can protect spandex and not change color.
Dosage: 2-3g/L, Temperature 90℃; Running time 20 min
Write your message here and send it to us
